Wednesday, 25 September 2019

SugarPea Designs Stamptember exclusive & Mix It Up Challenge 59


Today I am sharing a card that I made for the current SugarPea Designs Mix It Up Challenge #59 using a brand new SugarPea Designs stamp and die set (that I happened to illustrate) called Nordic Village.

This is an EXCLUSIVE whilte-stocks-last set released in collaboration with Simon Says Stamp for their Stamptember celebration.  The stamp set and the stamp and die set bundle is available to purchase exclusively from Simon Says Stamp while stocks last!


https://www.simonsaysstamp.com/product/SugarPea-Designs-Clear-Stamps-and-Dies-Set-STAMPtember-2019-Exclusive-setsr19sp/0

https://www.simonsaysstamp.com/product/SugarPea-Designs-Clear-Stamps-and-Dies-Set-STAMPtember-2019-Exclusive-setsr19sp/0

For my card, I started by die cutting a 4.25x5.5" stitched panel from grey card using the largest die from the Card Front Element Builder die set.  I then used some clear embossing paste with the Falling Snowflake Stencil to add some detail to the panel.  (Before the paste was dry, I sprinkled it with very fine glitter).  Once the panel was dry, I fixed it to a 4.5x5.75" navy card base.

I stamped one of the houses and the little bird using pink ink, a tree using green ink, and 2 houses and a second tree using navy ink, then added some additional colour to the houses using navy, green and pink Copic markers.  I also stamped 4 of the tiny strings of beads in navy ink, then cut everything out using the coordinating die set.

The houses were fixed to the top of a panel of white card using foam pads for dimension, and the trees were glued in between (I couldn't use foam pads as they would have been too unstable).  I glued the strings behind the houses and trees to connect them, added foam pads behind everything and popped the finished village onto the front of my card.  To finish, I added the tiny pink bird to the top of the navy tree.  I stamped one of the sentiments from the set in Versamark ink onto a strip of navy card, heat embossed it in white, then added it below the scene using foam pads.



https://sugarpeadesigns.com/products/falling-snow-stencil

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762872

To read a little more about our exclusive collaboration and to see the gorgeous creations that the rest of the SugarPea DT have created, hop on over to the SugarPea Designs blog.

https://sugarpeablog.com/mix-it-up-challenge-59/

Hope you have a wonderful Wednesday!

Friday, 13 September 2019

SugarPea Designs September 2019 Release Day

Hi everyone and welcome to the final day of the SugarPea Designs Holiday 2019 sneak peeks!

The new release will be available to purchase in the SPD Store at 6PM EST TODAY (Friday, September 13th 2019).

For our final day of sneak peeks, we are showcasing 2 fantastic die sets - Floral Pocket Tag and a Christmas accessory set to go with the Pocket Tag - Christmas Characters.

The Floral Pocket Tag is a stand-a-lone die that when assembled has a pocket in the back which is the perfect size for a credit card sized gift card.  The tag set comes with flower and leaf dies so you can use it for any occasion ... HOWEVER, you can also purchase a separate add-on set of dies that allows you to cut all the shapes to turn the pocket tag into at least 5 different Christmas characters!  How cool is that?  Although I haven't experimented yet, I'm 99.9% sure that the character die set will be able to be used to create non-Christmas characters/critters as well! :)


For my project today, I had the idea to create an advent calendar of 25 tags.  However, so far I've only managed to create 3, lol! (And I haven't added the numbers yet but I will use the small typewriter numbers from the SugarCut You're My Type die set).  But hopefully you get the idea.  We are going to put little "treats" into the back pockets such as chocolate, biscuits, candy canes, small gifts etc. and hang them on a tabletop tree.   I used coloured card and patterned paper from various SugarPea Designs paper pads, together with some glitter cardstock.  It's difficult to tell from the photo but the black tag of the penguin character has been stamped with the Buffalo Check stamp and heat embossed with black glittery embossing powder.

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762582

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762581


PENGUIN - orange spotted paper

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762862


 ELF - yellow striped paper, yellow star paper

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762801


  SANTA & ELF- red spotted paper

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762786



PLEASE NOTE
All new product release links will become active Friday, September 13th at 6pm EST when the release goes live!


If you'd like to WIN today's stamp set, all you need to do is leave a comment on the SugarPea Designs blog and on the DT blogs listed there each day.  You have all week to comment, and winners during our Product Release will be announced after the release.

Thanks for stopping by today! See you tomorrow for our last day of sneak peeks!

Thursday, 12 September 2019

SugarPea Designs September 2019 release: Day 4

Hi everyone and welcome to the 4th day of the SugarPea Designs Holiday 2019 release sweet peeks!

We hope you’ll join us this week as we share Sweet Peeks for our NEWEST products, available to purchase in the SPD Store from this Friday, September 13th at 6PM EST.

Today we are sneak peeking the oh-so-cute Cutie Pie standalone die set, the Sweet as Pie stamp set and its coordinating Sweet as Pie die set, and a brand new addition to our cover plate collection - Leaf Cover Plate.


For my card, I began by stamping the new Buffalo Check stamp onto a 4.25x5.5" piece of white card using some wheat coloured ink.  I die cut one of the zig zag stitched rectangles from white card, added a sentiment from the Sweet as Pie stamp set in brown ink, layered the panel onto some cream card and popped it up onto the base using foam pads for dimension.  The pumpkin pie and little pumpkins were created using coloured card and the new Cutie Pie standalone die set - this set has lots of different accessories to create every flavour of pie imaginable as well as a shadow word die!  I inked the edges of some of the components of the pie and pumpkins to give them a little definition.  The leaves were die cut from 2 tones of green card using dies from the *NEW* SugarCut: Floral Pocket Tag die set.

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762585

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762584

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762583

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762586


PLEASE NOTE
All new product release links will become active Friday, September 13th at 6pm EST when the release goes live!


If you'd like to WIN today's stamp set, all you need to do is leave a comment on the SugarPea Designs blog and on the DT blogs listed there each day.  You have all week to comment, and winners during our Product Release will be announced after the release.

Thanks for stopping by today! See you tomorrow for our last day of sneak peeks!

Wednesday, 11 September 2019

SugarPea Designs September 2019 release: Day 3

Hi everyone and welcome to the 3rd day of the SugarPea Designs Holiday 2019 release sweet peeks!

We hope you’ll join us this week as we share Sweet Peeks for our NEWEST products, available to purchase in the SPD Store from this Friday, September 13th at 6PM EST.

Today we are sneak peeking the brand new SugarCut: Christmas Car standalone die set (designed by me), together with the gorgeous Oh So Jolly Sentiments stamp set and 2 Christmas word dies with shadows - Merry and Joy.


For my card, I used the SugarCut: Christmas Car standalone die set and the Oh So Jolly Sentiments stamp set.  I selectively inked the Merry from the Merry Christmas sentiment and then added Christmas using the previously released Everyday Sentiments stamp set.  The stitched scalloped panel was cut using the previously released SugarCut: Card Front Element Builder die set.

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762589

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762590

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762588

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762587

PLEASE NOTE
All new product release links will become active Friday, September 13th at 6pm EST when the release goes live!


If you'd like to WIN today's stamp set, all you need to do is leave a comment on the SugarPea Designs blog and on the DT blogs listed there each day.  You have all week to comment, and winners during our Product Release will be announced after the release.

Thanks for stopping by today! See you tomorrow for our next day of sneak peeks!

Tuesday, 10 September 2019

SugarPea Designs September 2019 release: Day 2

Hi everyone and welcome to the second day of the SugarPea Designs Holiday 2019 release sweet peeks!

We hope you’ll join us this week as we share Sweet Peeks for our NEWEST products, available to purchase in the SPD Store from this Friday, September 13th at 6PM EST.

Today we are sneak peeking the latest addition to our 'bear' line of stamps - Hey Winter stamp set and its coordinating die set, together with 2 new stencils that I had the pleasure of designing - Falling Snow and Geo Snowflake.  I used the Geo Snowflake stencil on yesterday's sneak peek card, so please scroll down or click here to see it in action!






PLEASE NOTE
All new product release links will become active Friday, September 13th at 6pm EST when the release goes live!


If you'd like to WIN today's stamp set, all you need to do is leave a comment on the SugarPea Designs blog and on the DT blogs listed there each day.  You have all week to comment, and winners during our Product Release will be announced after the release.

Thanks for stopping by today! See you tomorrow for our next day of sneak peeks!

Monday, 9 September 2019

SugarPea Designs September 2019 release: Day 1

Hi everyone and welcome to the first day of the SugarPea Designs Holiday 2019 release sweet peeks!

We hope you’ll join us this week as we share Sweet Peeks for our NEWEST products, available to purchase in the SPD Store from this Friday, September 13th at 6PM EST.

Today we are sneak peeking the adorable Gnome for Christmas stamp set and coordinating die set, along with the delightful Snow Globe die set and a fantastically versatile Buffalo Check background stamp.


I used all of today's new products on my card ... together with one of our new release stencils, so you have an early peek, hehe!  This stencil will be properly showcased tomorrow.

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762597

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762596

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762595

https://www.shareasale.com/m-pr.cfm?merchantID=89979&userID=647650&productID=959762598

PLEASE NOTE
All new product release links will become active Friday, September 13th at 6pm EST when the release goes live!


If you'd like to WIN today's stamp set, all you need to do is leave a comment on the SugarPea Designs blog and on the DT blogs listed there each day.  You have all week to comment, and winners during our Product Release will be announced after the release.

Thanks for stopping by today! See you tomorrow for our next day of sneak peeks!